Subject: I would also add...
Author:
Posted on: 2008-12-17 01:23:00 UTC
That the makers of these arms would know what they're doing, and almost certainly would custom-make each limb for each user. Thus for Anakin, being a Jedi, they would have probably leaned towards something that is fast and flexible, rather than the brutishly strong, since that's how Jedi fight. Of course, from what I've seen in the movie, it's pretty strong anyway.
I have a question for tropers with a knowledge of medtech in the Star Wars verse and/or cybernetics in general. What is possible and what isn't for a character with a mechanical right arm (ala Anakin Skywalker but the limb starts a little higher up)?
http://starwars.wikia.com/wiki/Cybernetics
Should be helpful, at least. And off the top of my head, I think almost anything a natural arm could do is possible for a mechanical one, though it needs maintenance and could be disabled electrically.
I meant beyond a normal arm...
Your question still isn't very clear.
Basically, could the extra strength work without negative side effects?
If you rest the elbow on something and lift from there, you're relying on the strength of that something. If you're trying to lift a broken landspeeder freehand or something, you'd better hope that arm's firmly attached to your body -- and that your bones are strong enough. Unless there are repulsors built into the arm (which is possible), of course.
hS, not very clearly
Bao-Dur's custom repulsor arm had the ability to break shields and emit electrical energy. It also amplified his strength significantly. That was a different kind of repulsor-powered arm though, and it was probably unique. Prosthetic arms can also carry weapons such as blasters, I think.
Of course there are side effects; prone to electocution and short-circuiting, but it's not made of tinfoil.
Right...that's helpful. Thanks. How about a punch against say...a human skull?
There's a couple factors involved...
Firstly, how much speed can the arm build up in the swing? Grevious-esque prosthetics would be at least human speed, and possibly a bit more (depending on how much he was using the Force), while Darth Vader-esque ones would probably be slower. We never really see Darth Vader move quickly... Initial speed translates into kinetic energy on the impact. Obviously, the harder the hit, the more impact damage (breaking bones, etc) is going to happen. Based on the movies (the only SW canon I'm familiar with), I'd guess it to be similar to a conventional human.
Second is follow-through. A large portion of the initial impact's energy dissipates as damage. Actually throwing people around happens in the follow-through, which is effectively a very short, fast shove. There's two things that affect the amount of energy that can be transfered - the weight of the cybernetic arm (a heavier arm will have more momentum, and deliver more shove at the cost of hitting power), and the strength and speed of the actuators (which can deliver something of a push during the contact time). Once again, guestimating from Episode 2 (where we see Grevious unable to overpower Obi-Wan), I would guess that Star Wars prosthetics aren't that much more powerful than regular humanity.
Finally, fist shape and strength. A blade will penetrate a skull deeply, while a brick-shaped fist with the same force could just crack it. Durability under impact loading is also important - if the fist deforms, it can enlarge the contact area, lessening the point load.
Fortunately for us, the human skull is very well designed. The average human, or even the average martial artist, really doesn't stand much of a chance to break it. Most martial art strikes to the head aim for softer targets - the nose, which is cartilage, and can be broken from the skull. Eyes. The temple is an interesting target because it's where a fairly major blood vessel enters the brain - a hard stroke to the temple can disrupt blood flow, without much risk of penetrating the skull itself. By far the easiest way to penetrate the skull is with a long, sharp object, delivering the maximum amount of impact energy to the smallest point possible. That much can be managed by a human with a good swing and a stiletto. A brute-force punch... For the vast majority of martial artists, there's no way a flat-fisted punch could really break a skull. Fractures would be the worst assumable injury.
As discussed above, I estimate Star Wars prosthetics to be similar to human strength and weight - the only real hope for a skull-breaking punch would be with a very non-human fist shape, or a swiss-army-knife stiletto attachment. Obviously, as they're mechanical things, one could build a massively powerful prosthetic arm, but see hS's comments concerning balance and leverage. There's also a weight problem - having a two hundred pound arm can be a real drag. (pun intended)
That the makers of these arms would know what they're doing, and almost certainly would custom-make each limb for each user. Thus for Anakin, being a Jedi, they would have probably leaned towards something that is fast and flexible, rather than the brutishly strong, since that's how Jedi fight. Of course, from what I've seen in the movie, it's pretty strong anyway.
Of course, Grievous vs Obi Wan has certain differences from the situation I had in mind:
1.The target was a fairly powerful force sensitive, and they seem to be considerably tougher than the average individual. (Energy resistance, blunt force etc.)
2.Grievous was mostly droid, making losing the limb unlikely.
Still, Grievous did manage to break a Neimoidian's skull with a punch in the ROTS novel, showing that limbs are capable of that feat against at least some species...
Point taken on the other factors though.